------------------------------------------------------------------------ Introduction to the Standalone WWW Blast server ------------------------------------------------------------------------ Index * Introduction * What's new in this revision? * Installation of the Standalone WWW server * Description of files in the distribution * Configuration of BLAST databases * PSI/PHI Blast notes * Client/server versions for Entrez lookup and taxonomy reports * Blast 2 sequences * XML output * Out of Frame BLASTX * RPS Blast * Description of tags for main BLAST input page * Server configuration file and logfile * How to debug WWW Blast programs Introduction This standalone WWW BLAST server suite of programs was designed similar to regular NCBI BLAST server and such command-line NCBI BLAST programs like "blastall", "blastpgp", "rpsblast" and "megablast". It incorporates most features, which exist in NCBI BLAST programs and should be relatively easy to use. This server does not support any request queuing and load balancing. As soon as user hit "Search" button, BLAST will start immediately if entered information is valid. So, this server is not intended to handle large load, which may exist in public service. Such queueing and loadbalancing however may be implemented using such products like Load Sharing Facility - "LSF" from Platform Computing Corporation. Interface to "LSF" was implemented in NCBI, however this was not included in this suite. Standalone server assumes, that user has its own BLAST or RPS-BLAST database, that should be searched and want to have simple WWW interface to this search. It is STRONLY recommended that user has experience to install and run standalone NCBI BLAST programs. After files uncompressed server is ready to be used immediately. Any customizations to the program are welcomed and may be done by experienced programmers using source code, which also provided. Recompilation of the server executables require, that programmer has compiled NCBI toolkit libraries. This toolkit may be downloaded from NCBI FTP web site: ftp://ncbi.nlm.nih.gov What's new in this revision? November, 6 2000 * Blast 2 sequences was added October, 19 2000 * RPS Blast was added * Out of Frame BLASTX (OOF) now available for testing and suggestions. September, 28 2000 * Added possibility to limit search to results of Entrez query (Regular client/server BLAST) September, 11 2000 * Added MEGABLAST search. * Added possibility to have multiple FASTA query input - batch searches with multiple graphical overviews. (Regular BLAST) August, 22 2000 * Added new advanced statistics to PSI Blast and ability to produce Smith-Waterman alignments * Added support for XML output. May, 17 2000 * PSI and PHI Blast were added to this distribution * Added support for client/server interface for gi/accesion lookups using Entrez * Added possibility to print Taxonomy reports * Added option to print alternative alignment with specific color schema March, 20 2000 * Initial revision Installation of the Standalone WWW server After downloading file wwwblast.Your_platform.tar.gz to your computer place it into document directory of HTTPD server and uncompress it by gzip -d wwwblast.Your_platform.tar.gz tar -xvpf wwwblast.Your_platform.tar Please note that parameter "p" in tar options is significant - it will preserve file access options stored in the distribution. Temporary directory for BLAST overview images (TmpGifs) should have 777 permission and logfiles (wwwblast.log and psiblast.log) should have 666. After you uncompressed distribution file "blast" directory will be created. You can access sample BLAST HTML input forms using URLs: * http://your_hostname/blast/blast.html * http://your_hostname/blast/blast_cs.html * http://your_hostname/blast/psiblast.html * http://your_hostname/blast/psiblast_cs.html This distribution comes with 2 BLAST databases: "test_aa_db" - sample protein database and "test_na_db" - sample nucleotide database. These databases configured to be searchable immediately with corresponding BLAST program. Description of files in the distribution * Root directory (./blast): Files with suffix "*_cs.*" are analogos to files without such suffix with added capability to make client/server Entrez lookups for sequence gis and accessions. blast.cgi, blast_cs.cgi - BLAST search start-up C-shell files .nlmstmanrc - Configuration file for the graphical overview image (do not edit!) blast.html, blast_cs.html - sample BLAST search input HTML forms megablast.html, megablast_cs.html - sample MEGABLAST search input HTML forms rpsblast.html, rpsblast_cs.html - sample RPS BLAST search input HTML forms blast.rc - Default configuration file for the WWW BLAST server psiblast.rc - Default configuration file for the PSI/PHI WWW BLAST server psiblast.cgi, psiblast_cs.cgi - PSI/PHI BLAST search start-up C-shell files psiblast.html, psiblast_cs.html - sample PSI/PHI BLAST search input HTML forms psiblast.REAL, psiblast_cs.REAL - Main PSI/PHI BLAST server executables wblast2.html, wblast2_cs.html - sample BLAST 2 sequences search input HTML forms wblast2.REAL, wblast2_cs.REAL - Main BLAST 2 sequences server executables bl2bag.cgi - CGI used to create 2 sequences alignment image on the fly xmlblast.html - sample form that produces only XML Blast Output xmlblast.cgi - sample start-up C-shell to produce XML content type blast_form.map - Auxiliary map file for the front BLAST image nph-viewgif.cgi - CGI program used to view and delete overview images readme.html - this documentation wwwblast.log - default logfile psiblast.log - default PSI/PHI Blast logfile ncbi_blast.rc - sample file for full NCBI set of databases * ./data directory - matrixes used in BLAST search * ./db directory. - Files of test BLAST databases: test_aa_db and test_na_db. This directory has also binary of formatdb program. * ./docs: - HTML pages used in sample BLAST search input page * ./images - images used in the sample BLAST search input page * ./Src - source directory for WWW BLAST server and formatdb program. * ./Src/XML - source directory for creation of XML output related files. o blstxml.asn - ASN.1 definition for Blast XML o blstxml.dtd - corresponding DTD * ./TmpGifs - storage for temporary BLAST overview gif files Configuration of BLAST databases To set up databases for the standalone WWW BLAST server it is necessary to follow these steps: 1. Copy file with concatenated FASTA entries, that will be used as a database into directory "./db" 2. Run "formatdb" program to format this database there. 3. Add name of the database into server configuration file 4. Add name of the database into (PSI/PHI) WWW BLAST search form PSI/PHI Blast notes There is one significant feature of the PSI/PHI Blast server, that FASTA files as a source for BLAST databases should have GI number in the SeqId field. This is practically always TRUE for FASTA files from NCBI FTP site. Local databases may not be used with this version of PSI/PHI Blast unless they have ">gi|12345..." prefix in the definition line. Databases for the PSI/PHI Blast should always be created with formatdb using "-o T" flag. Test database "test_aa_db" was created using this flag and database "test_na_db" was created without this flag. If this distribution was installed not in "/blast" directory under HTTPD documents root directory, than path do the distribution should be set by environment WWW_ROOT_PATH in the file psiblast.cgi or psiblast_cs.cgi Client/server version for Entrez lookup and taxonomy reports Regular Blast, PSI/PHI Blast and MegaBlast have client/server versions for Entrez gi/accession lookups and printing Taxonomy reports. Configuration of client/server interface from the user to NCBI should be done as with any other client/server program to NCBI. If program "blastcl3" works without problems this server also should work OK. If user has firewall - default configuration will definitely fail to work properly and this case will require special configuration. General explanations of client/server configuration to NCBI is not subject of this discussion. In any case if user has problem with such configuration he should write to info@ncbi.nlm.nih.gov for farther assistance. XML output Possibility to produce XML output was added to this server. XML definition of BLAST output tied to the simple ASN.1 specification designed for this case. These definitions may be found in the directory ./Src/XML. Any recommendations on improvements to this (possible) standard may be sent to blast-help@ncbi.nlm.nih.gov or directly to me at shavirin@ncbi.nlm.nih.gov XML may be printed by setting "Alignment view" in blast.html or (blast_cs.html) page to "Blast XML". Resulted page will looks empty - but if you open page source (in Netscape - View -> Page source) - you will see complete XML document. As an example of XML usage sample page "xmlblast.html" was created. This form calls starter cshell script "xmlblast.cgi", which set Content-type of the output to ncbi/xmlblast. Now if browser can handle this type of content using plug-in or some helper application - it is possible to design custom BLAST output viewer. Blast 2 sequences Blast 2 sequences program was initially written by Tatiana Tatusova and Tom Madden and was presented in the article: Tatiana A. Tatusova, Thomas L. Madden (1999), "Blast 2 sequences - a new tool for comparing protein and nucleotide sequences", FEMS Microbiol Lett. 174:247-250. For standalone WWW version program was rewritten to accomodate general setup and remove absolete code and interfaces. RPS Blast RPS Blast or "Reversed Position Specific BLAST" was implemented as very fast alternative to the program IMPALA. It has the same general objective - to search collection of conserved domains or motifs or profiles or HMMs - there are many names for this collection. In the contrary RPS Blast has completaly different implementation, that increased speed of profiles search from 10 to 100 times depending on search conditions in comarison with IMPALA. RPS Blast has translated variant, that allows to search DNA sequences against these conserved domains. Currently RPS Blast - is one of tools choosen to annotate human genome in NCBI and base for CDD Blast search page. Databases for RPS blast are hardware dependent - for speed reasons. So they are different for big/little endian platforms. To build RPS database it is necessary to follow procedure explained in the file "README.rps", that comes with this distribution. There is small RPS database available for testing. This database is a part of real NCBI database used in CDD search page. Full NCBI database available in platform-independent form from FTP site. Out of Frame BLASTX OOF alignment functions were origianlly written by Zheng Zhang in 1997, who worked that time in Penn State University and currently working for Paracel Inc. These functions were never used since then due to unability to handle different scales for query and subject of high scoring pairs (DNA scale vs. protein scale) His original package included low-level OOF gapped alignment functions, those aligned whole (not-in-frame) DNA to protein. This package now incorporated into regular BLAST API. Due to the fact, that all currently existing alignment viewers can "live" only in "the same scale world" - protein/protein or DNA/DNA and cannot show alignemnt with different scales for sequences to be aligned - I had to implement custom viewer especially for OOF alignments. Also it was neccesary to create all trace of transforms from low level Zhang's traceback structures to standrand NCBI alignment structures with added new features to store frameshift information. This viewer can show now only pairwise Traditional Blast output. XML output is not yet implemented. Description of tags for main BLAST input page This standalone server has analogos tag convention to regular NCBI BLAST server. Sample BLAST search forms may be changed to accommodate particular needs of the user in the custom search. Here is the list of these tags and their meaning. If some tag is missing from the search input page this will take default value. Exceptions are tags PROGRAM, DATALIB and SEQUENCE (or SEQFILE), that should always be set. * PROGRAM - name of the BLAST program. Supported values include programs: blastn, blastp, blastx, tblastx and tblastn * DATALIB - name of the database(s) to search. This implementation includes possibility to use multiple databases. To use multiple databases few "DATALIB" tags should be used on the page for example using checkboxes (look for example at Microbial Genomes Blast Databases BLAST at NCBI). Note, that all of these databases should be properly written in the server configuration file. * SEQUENCE and SEQFILE - these tags used to pass sequence. First SEQUENCE tag is used for the input sequence and if it is missing SEQFILE tag used instead. * UNGAPPED_ALIGNMENT - default BLAST search is gapped search this tag if set will turn gapped alignment off * MAT_PARAM used to set 3 parameters at the same time. Value for this tag should be in format " " where mat_name - string name of the matrix (BLOSUM62, etc), d1 - integer for cost to open gap and d2 - cost to extend gap (-G and -E parameters in blastall respectably) * GAP_OPEN - set value for cost to open gap - 0 or missing tag invoked default behavior * GAP_EXTEND - set value for cost to extend gap - 0 or missing tag invoked default behavior * X_DROPOFF - Dropoff (X) for blast extensions in bits (default if zero) (-y parameter in "blastpgp" program) * GENETIC_CODE - Query Genetic code to use (for blastx only) * THRESHOLD_1 - Threshold for extending hits in first pass in multipass model search (-f in blastall) * THRESHOLD_2 - Threshold for extending hits in second pass in multipass model search * MATRIX - Matrix (default is BLOSUM62) (-M in blastall) * EXPECT - Expectation value (-e in blastall) * NUM_OF_BITS - Number of bits to trigger gapping (-N in blastpgp) * NCBI_GI - If formated database use SeqIds in the NCBI format this option will turn printing of gis together with accessions. * FILTER - Multiple instances of values of this tag are concatenated and passed to the engine as "filter_string" ("L" for low complexity and "m" if filter should be set for lookup table only) - any letter will turn default filtering on - DUST for nucleotides and SEG for proteins (-F in blastall) * DESCRIPTIONS - Number of one-line descriptions in the output (-v in blastall) * ALIGNMENTS - Number of alignments to show (-b in blastall) * COLOR_SCHEMA - Color schema to use in printing of alternative alignment. This option valid only for blastp and blastn programs. If set - it will override option set by "ALIGNMENT_VIEW" * TAX_BLAST - Print taxonomy reports. This option is valid only for client/server version of regular Blast * XML_OUTPUT - Print XML Blast output. All other alignment view options will be disabled * ENTREZ_QUERY - Limit search to results of Entrez query. Only for client/server version * RPSBLAST - This tag with turn "blastp" or "blastx" search into RPS Blast search for the rps blast database. * OOF_ALIGN -This flag if set to non-zero digit will turn on OOF alignment for "blastx" and will set frame shift penalty to this value. * OTHER_ADVANCED - this tag allows to input string analogous to the command line parameters of blastall. Setting parameter in OTHER_ADVANCED tag will override all other settings of this parameter. Supported options include: o -G gap open cost o -E gap extend cost o -q penalty for nucleotide mismatch o -r reward for nucleotide match o -e expect value o -W wordsize o -v Number of descriptions to print o -b Number of alignments to show o -K Number of best hits from a region to keep o -Y effective search space * ALIGNMENT_VIEW - will set type of alignment to show. Available options include: o 0 - Pairwise o 1 - master-slave with identities o 2 - master-slave without identities o 3 - flat master-slave with identities o 4 - flat master-slave without identities * OVERVIEW - used to turn on or off printing of alignment overview image * WWW_BLAST_TYPE - this special tag to distinguish different BLAST search types. See description of configuration file. Server configuration file and logfile Default configuration file is "blast.rc" and logfile "wwwblast.log". Setting tag WWW_BLAST_TYPE to specific value may change these names. This is useful if few different search input pages use the same CGI search engine, but significantly different by content and priorities. Here is sample configuration file comes with this distribution: # Number of CPUs to use for a single request # NumCpuToUse 4 # # Here is list of combination program/database, # that allowed by BLAST service. Format: ... # blastn test_na_db blastp test_aa_db blastx test_aa_db tblastn test_na_db tblastx test_na_db This file will set how many CPUs of computer will be used in the BLAST search and what databases may be used with what programs. Logfile currently store only limited information but also may be updated by programmers to store more values in it. Please note, that usually HTTPD servers run by accounts, that do not have write access to disk, so to write logfile - its permission should be set to 666. How to debug WWW Blast programs There is a way to debug these programs. 1. Add line "setenv DEBUG_COMMAND_LINE TRUE" into *.cgi file (uncomment it) 2. Run search, that results in the problem - this should create file "/tmp/__web.in" in the "/tmp" directory. 3. Set in command line all necessary environment (BLASTDB at least) and run from command-line: "blast.REAL < /tmp/__web.in" This should do your problematic search without WWW. If this resulted in coredump - you may look into corefile with: dbx blast.REAL core and then use command "where" to print stack. ------------------------------------------------------------------------ Sergei Shavirin Last modified: Fri Sep 1 13:51:15 EST 2000